Description

Yamaha DT1, DT2 & RD350
Rear Shocks (set of 2)

Measure 12" from eye mounts.
Note: hole in eye mount is 12mm

High qualilty replica of original OEM Suzuki T500 shocks will also fit DT1, DT2 & air cooled RD350 and RD250.

Description

Haynes Repair Manual - Yamaha XS650 & TX650
1970-1983

Haynes softcover shop manual for service, repair & maintenance of XS650 & TX650 twins. Hundreds of photos and illustrations.

Description

Clymer Repair Manual - Yamaha 250-400cc 1968-76 for piston port models
DT1, DT2, DT3, DT250, DT360, DT400, MX250, MX360, RT1, RT2, RT3, YZ250, YZ350, YZ360

Comprehensive softcover shop manual for service, repair & maintenance. Hundreds of photos and illustrations.

$24 USD plus shipping
Contact us for shipping cost
parts@reproductiondecals.com

Brand new vintage manual available in LIMITED QUANTITY

Description

Haynes Repair Manual - Yamaha RD250 & RD350

Haynes softcover shop manual for service, repair & maintenance of RD250, RD350, & YR5 air cooled twins. Hundreds of photos and illustrations.

Description

Haynes Repair Manual - Yamaha RD400

Haynes softcover shop manual for service, repair & maintenance of RD400 air cooled twins. Hundreds of photos and illustrations.

Description

Haynes Repair Manual - Yamaha RZ350 & RD350 YPVS

Haynes softcover shop manual for service, repair & maintenance of RZ350 & RD350 YPVS models. Hundreds of photos and illustrations.

Description

Haynes Repair Manual - Yamaha TT500, XT500 & SR500

Haynes softcover shop manual for service, repair & maintenance of TT500, XT500 & SR500. Hundreds of photos and illustrations.

Description

Haynes Repair Manual - Yamaha 2 & 4 stroke

Haynes softcover shop manual for service, repair & maintenance of PW, TT, RT, XT. Hundreds of photos and illustrations.

Description

Yamaha RD, SR500 & XT500 - Turn Signal - Chrome (single wire)
1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1976 XT500, 1978-81 SR500

OEM replica turn signal. High quality chrome finish. Single wire. For use on XT500 bulb must replaced with 6v.

Replaces OEM 28439-001

Description

Yamaha RD & SR500 - Turn Signal - Chrome (dual wire)
1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1978-81 SR500

OEM replica turn signal. High quality chrome finish. Dual wire.

Replaces OEM 28439-001

Description

Horn / Starter Button Kawasaki & Yamaha

Fits most 1969-79 Kawasaki and most 70s & 80s Yamaha models.

Replaces Kawasaki 46028-003, 46079-003 & 46031-005

Description

Clutch & Brake Lever Set (silver) - Yamaha (OEM replacement)

Brake Lever: 306-83922-00, 360-83922-01, 341-83922-00, 1AO-83922-00
Clutch Lever: YAMAHA #214-83912-00, 583-83912-10, 1J3-83912-10
SUZUKI: 57620-45020, 57620-29400

Description

Brake Lever (silver) - Yamaha (OEM replacement)

Replaces OEM brake lever: 306-83922-00, 360-83922-01, 341-83922-00, 1AO-83922-00

YAMAHA: 1974-79 TZ750, 1976-79 TZ250, 1974 TX750, 1973-74 TX650, 1975-76 XS650, 1972 XS2, 1973-74 TX500, 1975 XS500, 1976-78 RD400, 1973-75 RD350, 1976-77 RD200, 1974 RD125

Description

Clutch Lever (silver) - Yamaha & Suzuki (OEM replacement)

Replaces OEM clutch lever: YAMAHA #214-83912-00, 583-83912-10, 1J3-83912-10
SUZUKI: 57620-45020, 57620-29400

Description

Clutch & Brake Lever Set (black) - Yamaha - (OEM replacement)

Brake Lever: 2J2-83922-20, 2H7-83922-20, 4LO-83922-00
Clutch Lever: 2H7-83912-00, 2HO-83912-00, 2HO-83912-30, 4LO-83912-00

Description

Brake Lever (black) - Yamaha (OEM replacement)

Replaces OEM brake lever: 2J2-83922-20, 2H7-83922-20, 4LO-83922-00

YAMAHA: 1982-84 XJ1100, 1978-81 XS1100, 1980-81 XS1100L, 1979-81 XS1100S, 1984-86 XV1000, 1982-83 XV920, 1981 XV920R, 1980 XS850, 1980 XS850L, 1980-81 XS850S, 1982 XJ750, 1983 XJ750L, 1983 XJ750M, 1979 XS750S, 1981 XV750, 1983-85 XV750, 1983 XV750M, 1983-84 XJ650, 1982 XJ650RJ/RJC, 1979 XS650F/2F, 1978-81 XS650S, 1983-84 XS650S, 1981-84 XJ550, 1982-83 XJ550R, 1982-83 XZ550R, 1978-79 SR500, 1983-85 XV500, 1978-79 XS400, 1982-84 XS400, 1982 XS400R, 1980-82 XS400S, 1981-82 RD350

Description

Yamaha
Lever - Clutch
DT1 & others

Quality Reproduction. Replaces OEM 401-26802

Description

Yamaha
Lever - Front Brake
DT1 & others

Quality Reproduction. Replaces OEM 401-26801

Description

Yamaha DT1
Lever Perch - Clutch
DT1 & others. Includes adjuster and bolts

For use with OEM lever or SC628-165.
Emgo

Description

Yamaha DT1
Lever Perch - Front Brake
DT1 & others. Includes adjuster and bolts

Replaces OEM 401-73803. For use with OEM lever or SC628-065.
Emgo

Description

Yamaha DT1
Lever Set
Clutch & brake levers with perches

Inexpensive replacement for Japanese OEM units

Description

Clutch Lever Assembly - Black
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic clutches.

Motion Pro 14-0104

Description

Brake Lever Assembly - Black
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic brakes.

Motion Pro 14-0105

Description

Clutch & Brake Lever Assembly - Black
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic brakes & clutches.

Motion Pro 14-0104 & 14-0105

Description

Clutch Lever Assembly - Polished
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic clutches.

Motion Pro 14-0106

Description

Brake Lever Assembly - Polished
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic brakes.

Motion Pro 14-0107

Description

Clutch & Brake Lever Assembly - Polished
Universal replacement for Kawasaki, Suzuki & Yamaha models. Not for use with hydraulic brakes & clutches.

Motion Pro 14-0106 & 14-0107

Description

Cable Adjusters - 8mm
(set of 2)

Universal 8mm cable adjusters.

Description

Cable Adjuster - 8mm
(single)

Universal 8mm cable adjuster.

Description

Yamaha XS1 & DT1
Fuel Tank Badge Set
Injection molded plastic

Holes are 115mm apart

Chrome/Black

$125 USD PER SET
including worldwide postage
parts@reproductiondecals.com

Description

Yamaha XS1 & DT1
Fuel Tank Badge Set
Injection molded plastic

Holes are 115mm apart

Chrome/Red/Black

Description

Yamaha Oil Injection Tank Filler Cap
Models Listed Below

Genuine Yamaha part

AT1, AT1B, AT1C, AT1E, AT1M, AT1-MB, AT1-MX, AT2, AT2M, AT3, AT-MX, CS5, CT1, CT1B, CT1C, CT2, CT3, DS7, DT1, DT1B, DT1C, DT1C-MX, DT1E, DT1MX, DT1S, DT2, DT3, DT100, DT125, DT175, DT250, DT360, DT360A, DT400, HT1, HT1B, HT1BM, LS2, LT2, LT2M, LT3, LTMX, R5, R5B, R5C, RD125, RD200, RD250, RD350, RD350A, RD350B, RD400C, RD400D, RD400E, RD400F, RD400G, RS100, RS100C, RT1, RT1B, RT1M, RT1MX, RT2, RT3

Description

Yamaha Front Foot Peg Rubber Set
Models Listed Below

Genuine Yamaha part

AS2C, CS3, CS3C, CS3B, C5, DS6, DS6B, DS6C, DS7, LT5, LT5A, Trailmaster 100, R3, Grand Prix, R5, R5B, R5C, RD200, RD200A, RD200B, RD200C, RD250, RD250A, RD250B, RD350, RD350A, RD350B, YAS1C, 125 Twin Scrambler, YCS1, YCS1C, 180 Twin Scrambler, Bonanza 180, YDS5, Catalina Electra 250, YG1, YG1K, YG1T, YG1TK, Trailmaster 80, YG5, YG5S, YG5T, Trailmaster 80, YL2, YL2C, YL2CM, Rotary Jet 100, Trailmaster 100, YM2C, Big Bear Scrambler 305, YR1, YR2, YR2C, Grand Prix Scrambler 350

Description

Yamaha Rear Footrest Set (Set of 2)
XS650, RD350 and other models.

Folding passenger footrests. Right and left sided.

Aftermarket Replacement

Description

Yamaha RD400C/D/E/F/G
Complete Gasket Set
1976-1980 RD400

Made in Japan to OEM specifications by Vesrah

Description

Yamaha RD350/A/B
Complete Gasket Set
1973-1975 RD350

Made in Japan to OEM specifications by Vesrah

Description

Yamaha TT, XT & SR
Complete Gasket Set
TT500, XT500 & SR500

Made in Japan to OEM specifications by Vesrah. VG-274/674

Description

Yamaha Oil Sight Level Glass & Seal Assembly
84-85 FJ1100, 86-93 FJ1200, 02-04 FZ1000, 88-95 FZR1000, 89-95 FZR600, 90-99 FZR600R, 85-05 VMX1200, 81-84 XJ650 Maxim, 81-83 XJ650L, 82 XJ650R, 78-81 XS1100, 80-81 XS1100L, 79-81 XS1100S, 78-79 XS750/S, 80-81 XS850/L/S, 84-85 XV1000, 86-99 XV1100/S, 81-83 & 86-98 XV750

Replaces OEM 2H7-15361-00

Description

Horn / Starter Button Kawasaki & Yamaha

Fits most 1969-79 Kawasaki and most 70s & 80s Yamaha models.

Replaces Kawasaki 46028-003, 46079-003 & 46031-005

Description

Yamaha DT1 Tail Lens

REPLACES PART# 168-84721-60-00

Aftermarket lens made in Japan by CGC.

DT1 and other models

Description

Yamaha Tail Lens
4.5" diameter X 2.5" high
Models listed below

REPLACES PART# 275-84521-60 & 341-84721-60

Aftermarket lens made in Japan by CGC.

Description

Yamaha
Kickstart Rubber
Models listed below

Genuine Yamaha part 156-15618-01

YAMAHA: RD50, RD60, RD80, RD125, RD200, RD250, RD350, RD400, RD250LC, RD350LC, RD350LC, YPVS, RZ350, TZR250, TD2, TD2B, T2R, TR2, TR2B, TX500, XS250, XS360, XS400, XS500, XS650, XS750, XS850, XS1100, RS100, RT100, SR125, SR250, SRX600, GT1, GT80, GTMX, HS1, HS1B, HT1, HT1B, HT1BM, JT1, JT1L, JT2, JT2MX, L5T, L5TA, LB50, LB80, LS2, LT2, LT2M, LT3, LTMX, YA6, YAS1C, YCS1, YCS1C, YDS5, YG1, YG5S, YG5C, YJ1, YJ1K, YJ2, YJ2S, YL1, YL1E, YL2, YL2C, YL2CM, YM2C, YR1, YR2C, R3, R5, R5B, R5C, MX80, MX100, MX125, MX175, MX250, MX360, MX400, SC500, YZ80 up to 1979, YZ125 1974-75, YZ250 & YZ400 1976, TTR90, PW50, PW80, LC50, MJ50, RX50, QT50, BW80, U7E, FS1E, TY250 Twinshock All, TY50 All, TY80 All, XT500, TT500, IT400 1976 Models, DT50, DT80, DT100, DT125, DT175, DT1, DT2MX, DT250, RT2MX, DT360, DT400 All, AS2C, CS3B, CS3C, CS5, DS6B, DS6C, DS7, G6S, G6SB, G7S

Description

Yamaha
Shifter Rubber
Models listed below

Genuine Yamaha part 132-18113-01

YAMAHA: RD50, RD60, RD80, RD125, RD200, RD250, RD350, RD400, RD250LC, RD350LC, RD350LC, YPVS, RZ350, RZ500, TZ125G, TZR250T, TZR250U, YA6 , YAS1C , YCS1 , YDS5 , YG5S, YG5T, YJ2S, YL1, YL2, YM2, YR1, YR2, YR3, YSR50, YSR80, YX600, FJ600, FJ1100, FJ1200, FZ600, FZ700, FZ750, FZX700, FZR400, FZR600, FZR750, FZR1000, GTS1000, XJ550, XJ600, XJ650, XJ700, XJ750, XJ1100J , XS1, XS2 , XS360, XS400, XS500, XS650, XS750, XS850, XS1100, YZF350, YZF600, YZF750, YZF1000, XTZ750, XV250, XV535, XV700, XV750, XV920, XV1000, XV1100, XZ550, TX500, TX650 , TX750, SR185, SR250, SR500, SRX250, SRX600, TDM850, AS2C, AT1, AT2, AT3, ATMX , BW80, BW200, BW350, CS3, CS5, CT1, CT2, CT3, DS6, DS7, DT1, DT2, DT2MX, DT3, DT50, DT80, DT100, DT125, DT175, DT250, DT360, DT400, RS100, RT100, RT1, RT2, RT3 , RX50, HS1, HT1, IT400, JT1, JT2, LB80, L5T, LS2, LT2, LT3, MX80, MX100, MX125, MX175, MX250, MX360, PW80, G6S, G7S, GT1, GT2, GTMX, GT80, SC500, TT500, XT125, XT200, XT250, XT500, TTR90, TW200, YZ50, YZ60, YZ80, YZ100, YZ125, YZ175, YZ250E, YZ400F, YFB250, YFM80, YFM100, YFM200, YFM220, YFM250, YFM350, YFM400, YFP350, YFS200, YFZ350, YFZ450, YT125, YT175, YTM200, YTM225

Description

Yamaha
Shifter/ Brake Rubber
Fits several models

Genuine Yamaha part 22N-18113-00

Description

Hand Grip Set - Gran Tourisimo Type
Comfortable with classic styling

Dual wall rubber cushion grips. Black with closed ends. Inside length of 5" for 7/8" bars.

Sold in pairs.

Description

Hand Grip Set - Ribbed Yamaha Type

Black with closed ends. Inside length of 5" for 7/8" bars.

Sold in pairs.

Description

Yamaha YDS
Hand Grip Set

YDS1, YDS2, YDS3, YM1

Quality Reproduction. OEM 150-26241-00 & 150-26242-00. OEM numbers are for reference only.

Description

Yamaha Rear Footrest Set (Set of 2)
XS650, RD350 and other models.

Folding passenger footrests. Right and left sided.

Aftermarket Replacement

Description

Reflector (set of 2) - Red

Genuine Yamaha part with correct STANLEY markings.
Made in Japan.

Description

Reflector - Red
H2/A, Z1/A/B, S2, S1 & others models

Genuine Yamaha part with correct STANLEY markings.
Made in Japan.

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector (set of 2) - Red
H2/A, Z1/A/B, S2, S1 & other models

Replica reflectors with no Stanley markings. OEM part 28012-008 & 28001-009

Description

Kawasaki H2, Z1, S1, S2
Rear Reflector - Red
H2/A, Z1/A/B, S2, S1 & other models

Replica reflector with no Stanley markings. OEM part 28012-008 & 28001-009

Description

Reflector (set of 2) - Amber

Genuine Yamaha part with correct STANLEY markings.
Made in Japan.

Description

Reflector - Amber

Genuine Yamaha part with correct STANLEY markings.
Made in Japan.

Description

Yamaha XS TX
Swingarm Bushings (pair) Bronze
XS360 XS400 (77-80) TX500 (73-74) XS500 (75 77-78) XS1 XS2 TX650 (73-74) XS650 (75-81) TX750 (74)

Replaces OEM part 90386-22029-00

Description

Yamaha RD350, RD400, XVS
Wheel Bearing - Seal Kit Front
RD350 1973-75, RD400 1976-80, XVS1100 V-Star 1999-09, XVS1300 2008, XVS650 V-Star


Kit contains all necessary bearings and seals for one rear wheel.

Description

Yamaha & Kawasaki
Wheel Bearing - Seal Kit Front
Models - listed below


Kit contains all necessary bearings and seals for one rear wheel.

Yamaha 
FJ600 1984-1985, RD200 1974-1976, RD400 1976-1979, SRX600 1986, XJ550 Maxim 1981-1983, XJ550 Seca 1981-1983, XJ700 Maxim 1985-1986, XJ750 Maxim 1985-1986, XS360 1976-1977, XS400 & Maxim 1977-1983, XV1000 Virago 1984-1985, XV1100 Virago 1986-1999, XV250 Route 66 1988-1990, XV700 Virago 1984-1986, XV750 Virago 1988-1997, XZ550 1982-1983, YTZ250 Tri-Moto 1985-1986
Kawasaki 
KX250 1976, KZ400A 1977-1978, KZ440A & B 1980-1983

Description

Yamaha RD400 & XS500
Wheel Bearing - Seal Kit Rear
RD400C/D/E/F/G 1976-1980
XS500 1976-1978

Kit contains all necessary bearings and seals for one rear wheel.

Description

Yamaha XS650
Wheel Bearing - Seal Kit Front
Yamaha: 1970-72 XS650

Kit contains all necessary bearings and seals for one front wheel.

Description

Yamaha
Wheel Bearing - Seal Kit Front
YT1-125 1980-85

Kit contains all necessary bearings and seals for one front wheel.

Description

Yamaha Wheel Bearing - Seal Kit Rear
Models - listed below

Kit contains all necessary bearings and seals for one rear wheel.

Yamaha
BW350 1987-1988, DT250 1975-1979, DT400 1975-1978, IT250 1977-1980, IT400 1976-1979, IT425 1980, MX 360 1974, MX250 1973-1975, MX400 1975, SC500 1973-1974, SR500 1980-1981, TT500 1976-1981, YZ250 1974-1979, YZ400 1976-1979, YZ465 80

Description

Yamaha & Honda Wheel Bearing - Seal Kit Front
Models - listed below

Kit contains all necessary bearings and seals for one front wheel.

Honda
CR125R 1979-1981, CR250R 1978-1980, XL200R 1983-1984, XL250R 1982-1987, XL250S 1978-1981, XL500S 1979-1981, XR200R 1981-2002, XR250 1979-1980, XR500 1979-1980
Yamaha
DT125 (Euro) 1999-2006, DT250 1975-1979, DT400 1975-1978, MX 360 1974, MX125 1976, MX250 1973-1975, MX400 1975, RT 360 1970-1973, SC500 1973-1974, SR250 Exciter 1980-1982, TT250 1980-1982, TT500 1976-1981, TW200 Trailway 1987-2011, XT250 1980-1984, XT500 1976-1981, XT550 1982-1983, XT600E (Euro) 1996-2002, XTZ TENERE 660 (Euro) 1994-1996, YZ100 1976-1977, YZ125 1976-1982, YZ175 1976, YZ250 1974-1982, YZ400 1976-1979, YZ465 1980-1981, YZ490 1982-1983

Description

Yamaha Wheel Bearing - Seal Kit Rear
RT360 1970-1973, XT500 1976-1981

Kit contains all necessary bearings and seals for one rear wheel.

Description

Yamaha Steering Stem Bearing Set
Models listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Yamaha & Suzuki
Steering Stem Bearing & Seal Kit
Models listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Yamaha RZ, RD, TZ, YZ, IT
Clutch Springs - Set of 6
Models listed below

Made in USA by Barnett Performance Products

Hiigh performance clutch springs. Heavy duty springs.

YAMAHA: RZ3350 84-90, RD350LC 80-82, RD400 76-79, TD3 72, TR3 72, TZ250 ALL, TZ350 74-78, FZ400 87-88, YZ250 76-79, YZ250 81-87, YZ490 82-94, YZ465 80-81, YZ400 76-79, IT425 80, IT250 79-83, IT465 81-82, IT490 83-84, MX250 75, WR500Z 92-93,

Description

Yamaha Dual Sport & Offroad Fuel Valve

Models listed below

Quality reproduction petcock assembly. Replaces OEM 498-24500-01, 438-24500-01-00 & 214-24500-02-00

Description

Yamaha RZ350 & RD350 Locking Fuel Cap

Models listed below

Quality reproduction twist-off Yamaha gas cap. Locking fuel cap assembly with 2 keys.

Description

Yamaha YDS, DS6, DS7, R5 and other early models
Gas Cap - twist on type

Replica fuel cap. Same size and design as OEM cap without tuning fork logo.

Quality Reproduction made in Japan

Description

YDS3, YDS3C, YDS5. YM2, YM2C, YR1, YR2. YR3
Carburetor Cap (set of 2)

Replaces OEM part 156-14169-00
Quality Reproduction

Possibly fits other models

Description

YDS3, YDS3C Carburetor Joints (set of 2)

Replaces OEM part 156-14453-00
Quality Reproduction

Possibly fits other models

Description

Yamaha XT, TT & SR500
Carb Holder Manifold & Gasket
1978-81 SR500E/F/G
1976-81 TT500C/D/E/F/H
1976-81 XT500C/D/E/F/G/H

Quality Reproduction.

For use with stock carburetor

Description

YDS3 main Stand Rubber Damper (low pipe model only)

Replaces OEM part 156-27114-00
Quality Reproduction

Description

Steering Damper
Custom brackets must be made for universal fit.

Identical to original Kawasaki steering Damper 46117-006. Variable force, oil-filled hydraulic steering damper. Seven-point adjustment range. Brackets are not included.

Quality Reproduction made in Japan by RC Engineering.

Description

Headlight Brackets - Universal Side Mount
One pair (2) chrome universal fit headlight ears for forks up to 36mm in diameter - two adjustment slots.

EMGO. Sold only as a set

Description

Handlebar 7/8" Chrome - European Bar

Width: 29.5"
Rise: 2"
Pullback: 5.5"
Center Width: 4.5"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Handlebar 7/8" Chrome - Superbike Bar

Width: 29"
Rise: 2.5"
Pullback: 4.75"
Center Width: 4.75"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

$24.99 USD plus shipping
Contact us for shipping cost
parts@reproductiondecals.com

Description

Handlebar 7/8" Chrome - Drag Bar

Width: 27.5"
Rise: 0"
Pullback: 3.75"
Center Width: 8"

When changing handlebars check clearance. Cable and hose lengths may need to be adjusted to compensate.

Description

Yamaha XS650 Stainless Steel Bolt Set
1975-1984 XS650

Includes 44 bolts. Contains visible bolts on lower engine covers.

Description

Yamaha XT500E Stainless Steel Bolt Set
1978 XT500E

Includes 46 bolts. Contains visible bolts on lower engine covers.

Description

Yamaha XT500 Stainless Steel Bolt Set
1981 XT500

Includes 47 bolts. Contains visible bolts on lower engine covers.

Description

Yamaha TT500 Stainless Steel Bolt Set
1976-1979 TT500

Includes 53 bolts. Contains visible bolts on lower engine covers.

Description

Yamaha DT & RT Stainless Steel Bolt Set
1973 RT3, RT2, DT3, DT2

Includes 35 bolts. Contains visible bolts on lower engine covers.

Description

Yamaha DT, MX, YZ & Kawasaki S1, F, KX, KDX, KE
Clutch Springs - Set of 5

Models listed below

Made in USA by Barnett Performance Products. High performance clutch springs. Heavy duty springs.

Kawasaki
1971-73 F6/A/B, 1975-79 KD125, 1976-83 KE125, 1974-75 KS125, 1974-76 KX125, 1978-87 KX125, 1968-70 F3, 1971-75 F7, 1976-79 KD175, 1980-82 KDX175, 1976-78 KE175, 1980-83 KE175, 1983-85 KDX200, 1986-88 KDX200, 1976 KH250, 1973-75 S1
Yamaha
2002-04 YZ85, 1975 DT100, 1978-83 DT100, 1979-83 MX100

Description

Yamaha RZ
Master Cylinder Rebuild KIT - Front
Models listed below

Contains all components to rebuild one OEM master cylinder. Made in Japan.

YAMAHA 1984-85 RZ350L/N/NC/NCII, 1983 XZ550RK Vision, 19982-83 XJ650LJ/LK Seca Turbo, 1982 XJ650RJ Seca, 1985-86 XJ700N/NC/S/SC Maxim, 1985-86 XJ700XN/XNC/XS/XSC Maxim, 1984-85 XV700L/LC/N/NC Virago, 1986-87 XV700CS/CSC/CT/CTC Virago, 1986 XV700SS/SSC Virago, 1982-83 XJ750J/K Maxim, 1983 XJ750MK Midnight Maxim, 1988-96 XV750U/UC/-H/HC Virago, 1996-97 XV750H1/H1C/J1/J1C Virago, 1983 XJ900RK Seca, 1982 XV920J Virago, 1981-82 XV920RH/RJ, 1989-90 FZR1000W/WC/A/AC, 1991-95 FZR1000B/BC/-G/GC, 1984-85 XV1000L/LC/N/NC Virago, 1986-99 XV1100S/SC-L/LC Virago, 1996-98 XV1100SH/SHC-SK/SKC Virago, 1996-2000 XVZ13A Royal Star, 2000 XVZ1300TFSMC, 1999-2004 XVZ1300TFL/TFLC-TFS/TFSC, 2002 XVZ1300TFSPC, 2004 XVZ1300TFMS/TFMSC, 1999-2003 XV1600AL/ALC-ARC Road Star, 2003 XV1600ALER/ALERC, 2001-2003 XV1600ASN/ASNC-ASR/ASRC, 1999-2003 XV1600ATL-ATR/ATRC, 2003 XV1600ATLER/ATERC

Description

Brake Banjo Bolt Set
Stainless Steel Bolts

Includes:
2 - Stainless steel bolts
4 - Crush washers

Description

Yamaha XT500 & TT500
VM38 Carb Kit
Includes:
- Pre-jetted Mikuni VM38S round slide carburetor
- Mikuni rubber mounting flange

Substite the VM38 with a TM38 Mikuni flat slide for an additional $25 USD.

Description

Yamaha XT500 & TT500
VM36 Carb Kit
Includes:
- Pre-jetted Mikuni VM36S round slide carburetor
- Mikuni rubber mounting flange

Substite the VM36 with a TM36 Mikuni flat slide for an additional $25 USD.

Description

Petcock - Yamaha
Models listed below

Single outlet on the right side.

Includes HT wires and plug caps. Replaces OEM 367-24500-04-00

Yamaha 1971-72 JT1/J2TMX, 1971-72 JT1/JT2, 1981-83 DT80H/J/K, 1973 GT1, 1974-76 GT80A/B/C, 1978-80 GT80E/F/G, 1973-76 GTMX/GTMXA/GTMXB/GTMXC, 1977-79 GTMXD/GTMXA/GTMXF, 1981-83MX80G/H/J, 1977-79 YZ80D/E/F, 1977-83 DT100D/E/F/G/H/J/K, 1977-83 MX100F/G/H/J/K

Description

Yamaha YDS, SR, XS & TX
Mikuni Carburetor Float
Standard on VM24-VM26 flange type carburetors
YDS3, SR250 80-82, XS500C 76, XS1/XS1B/XS2 70-72, TX650/A 73-74, XS650B/C/D/E/F 75-79, XS6502F 79, XS650SE/SF 78-79, TX750/A 73-74 and others

Geniune Mukuni part VM24/171. Made iin Japan.
Sold individually.

Description

Fuel Line T Connector 1/4"
For use on 1/4" I.D. fuel line.

Sold individually.

Description

Fuel Filter - In Line
2" body for 1/4" fuel line

Sintered Bronze element. Slim line, see through design.

Description

Air Filter - S&B
Individual 42mm Pod
Models listed below

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

Made in USA

KAWASAKI 1969-75 H1/A/B/C/D/E/F, 1976 KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976 KZ900 A4, 1976 KZ900 LTD, 1981-85 KZ1100 & KZ1000 F1, 1983-85 ZX1100 GPz, 19777-80 KZ1000
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S
YAMAHA 1973-75 RD250, 1973-75 RD350, 1976-79 RD400, 1984-85 RZ350
HONDA 1976-78 CB750 A Hondamatic, 1976-78 CB750 F Supersport, 1976-78 CB750 K Four

Description

Air Filter - S&B
Individual 52.8mm Pod
Models listed below

52.8mm internal diameter
89mm filter outside diameter
102mm filter length
15mm flange length

Made in USA

KAWASAKI 1985-89 ZX600, 1986 ZL600 Eliminator, 1984-85 ZX550 GPz, 1981-85 GPz550, 1982-85 KZ550, 1987-88 EX500, 4 Stroke Twins All
SUZUKI 1986-88 GSX R1100, 1988-89 GSX1100 Katana, 1985-87 GSX-R750, GT750 All, 1986-87 GSX600 Katana, 1977-83 GS450/GS425/GS400
YAMAHA 1986-87 FJ1200, 1984-85 FJ1100, 1977-78 XS1100, 1987-89 FZR1000, 1981-83 XJ900, XS750 All, XS850 All, 1985-88 FZ750, 1985-88 FZ700, 1987-88 FZR750, 1986-87 FZX750 Fazer, XJ650 & XJ750 Maxim All, XJ550 & XJ750 All, 1981-83 XJ650, 1984-85 FJ600, 1986-88 FZ600, 1988-89 FZR400, 4 Stroke Twins All
HONDA 1979-84 CB750, VT750 All, CB650 All

Description

Air Filter - S&B
Individual 55mm Pod
Models listed below

55mm internal diameter
75mm filter outside diameter
76mm filter length
15mm flange length

Made in USA

KAWASAKI 1981-83 KZ1000, 1981-85 KZ1100, 1981-83 KZ1000, GPz1000 & GPz900, 1984-86 ZX900, 1983-85 ZX750 Gpz, KZ750 Fours All
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S, 1980-86 GS1150/GS1100/1000, 1980-86 GS750/GS850/GS650/GS550
YAMAHA 1982 XJ1100, 1979-81 XS1100,
HONDA 1981-82 CB900F, CB1100F All, CB1000C All, CB550SC All,

Description

Air Filter OVAL - S&B
Individual 55mm Pod
Models listed below

55mm internal diameter
75mm filter outside diameter
76mm filter length
15mm flange length

Made in USA

KAWASAKI 1981-83 KZ1000, 1981-85 KZ1100, 1981-83 KZ1000, GPz1000 & GPz900, 1984-86 ZX900, 1983-85 ZX750 Gpz, KZ750 Fours All
SUZUKI 1972-76 GT380 Sebring, 1972-77 GT550 Indy, 1977 GS750 E, 1978-79 GS1000, 1978-79 GS1000 E, 1979 GS1000 S, 1980-86 GS1150/GS1100/1000, 1980-86 GS750/GS850/GS650/GS550
YAMAHA 1982 XJ1100, 1979-81 XS1100,
HONDA 1981-82 CB900F, CB1100F All, CB1000C All, CB550SC All,

Description

Yamaha XS1B & RD
Mikuni Needle Valve
1971 XS1B, RD250, RD350 & RD400
Size 2.5

Replaces OEM part 168-14190-25-00. Geniune Mukuni part. Made in Japan.

Sold individually.

Description

Mikuni VM32-VM34
Needle Valve
For VM34 - VM34 round slide carburetor
Size 3.3

Geniune Mukuni part VM34/39. Made in Japan.

Sold individually.

Description

Mikuni 90 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 92.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 95 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 97.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 100 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 102.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 105 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 107.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 110 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 112.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 115 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 117.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 120 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 122.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 125 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 130 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 132.5 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni 160 Main Jet
Large Round N100.604
Geniune Mikuni part.

Kawasaki H1, H2, Z1, KZ900, KZ1000, KZ1100
Suzuki GS450, 500, 600, 650, 850, 1000, 1100, 1150
Yamaha XS350, 400, 750, 1100

Other sizes available

Description

Mikuni VM, TM, TMX Pilot Jet
Geniune Mikuni part.

Kawasaki H1, H2, Suzuki & Yamaha 2 stroke and some 4 stroke.

Sizes from 10 to 120 available

Description

Mikuni M28/1001 Pilot Jet
VM20 flange & VM26-606 spigot
Geniune Mikuni part.

Yamaha 2 stroke models. RZ350, YFZ350 Banshee 87-06, RD60 73-74, YSR50 87-92, YZ80 75-01, DT125 & DT175 74-81, MX175 79-81, YFS200 Blaster 88-06,

Sizes from 32.5 to 70 available

Description

K&L Carb Cleaner Wire Set
Use for cleaning popular size jets and carb body holes/passages.

Spiral knurling on wires.

Made by K&L

Description

NGK BUHX spark plug
Surface Gap Plug

14mm thread size

Originally designed for the H1. Standard equipment on 1969 & 1970 H1.

Description

NGK BUHX spark plugs
Surface Gap Plugs
BOX OF 10

SAVE 10% when you buy a box of 10 BUHX plugs

14mm thread size

Originally designed for the H1. Standard equipment on 1969 & 1970 H1.

Description

NGK B8HS spark plug

14mm thread size

Description

NGK B8HS spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B8HS plugs

14mm thread size

Description

NGK B9HS spark plug

14mm thread size

Description

NGK B9HS spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B9HS plugs

14mm thread size

Description

NGK B8ES spark plug

14mm thread size

Description

NGK B8ES spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B8ES plugs

14mm thread size

Description

NGK B9ES spark plug

14mm thread size

Description

NGK B9ES spark plugs
BOX OF 10

SAVE 10% when you buy a box of 10 B9ES plugs

14mm thread size

Description

NGK BP7ES sparkplug

14mm thread size

Description

NGK BP7ES spark plugs
BOX OF 4


14mm thread size

Description

NGK Spark Plug Cover
LZFH - Non Resistor Type

Thread Sizes: 10mm, 12mm& 14mm
Resistance: None
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LD05F

Thread Sizes: 10mm & 12mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Description

NGK Spark Plug Resistor Cover
LB05FP

Thread Sizes: 14mm
Resistance: 5 ohm
Configuration: 90 degree elbow

Special waterproof cover

Description

NGK Spark Plug Resistor Cover
LB01EP

Thread Sizes: 14mm
Resistance: 1 ohm
Configuration: 90 degree elbow
For terminal nut or integrated terminal. Special waterproof cover.

Description

NGK Spark Plug Wire Splicer

Used for splicing new wires on old coils. Joins two sections of plug wire together.

Made from high impact plastic to provide a watertight connection.

Description

Yamaha Ignition Points
(set of 2)
1966-67 YL1, 1969 AS2C, 1966 YA6, 1968 YAS1C, 1968 YCS1/YCS1C, 1970 CS3C

Made in Japan by Diaichi
Replaces OEM 132-81221-10-00 for HItachi ignition

Description

Yamaha XT500 & TT500
Ignition Tune Up Kit
1976-79 XT500C/D/E/F, 1976-79 TT500C/D/E/F

Made in Japan to OEM specifications ND ignition

Kit Includes:
1 - Contact Points
1 - Condenser

Description

Yamaha DT1, DT2, DT3 & RT1 - Ignition Tune Up Kit

Made in Japan to OEM specifications

Kit Includes:
2 - Sets of Contact Points
2 - Condensers

Description

Fork Seals
36 mm X 48 mm X 10.5 mm
Various models

OEM replacement

See application list below

Description

Fork Seals
34 mm X 46 mm X 10.5 mm
Various models

OEM replacement

See application list below

DS7 72, DT1/DT1B/DT1C/DT1E Enduro 68-71, DT1S Enduro 69, DT250A/B/C/D/E 74-78, DT1CMX/DT1EMX 70-71, DT2MX 72, MX250/a/B 73-75, TY250A Trials 74, TY250C/D Trials 76-77, YZ250A/B 74-75, RD250/A/B 73-75, R3 69, R5/R5B/R5C 70-72, RD350/A/B 73-75, TD3 Roadrace 72, TZ250 Roadrace 73, R3 69, TZ350 Roadrace 73, DT360A/B Enduro 74-75, RT1/RT1B Enduro 70-71, RT1M/RT1BMX/RT2MX 70-72, RT2/RT3 72-73, MX360/A 73-74, YZ360A/B 74-75, DT400B/C/D/E 75-78, MX400B 75, RD400C/D/E 76-78, TX500/A 73-74, XS500B 75, SC500/A Scrambler 73-74, XS1/XS1B/XS2 70-72, TX650/A 73-74, XS650B/C 75-76, MX125125C 76, YZ125C 76,

Description

Fork Seals
35 mm X 48 mm X 11 mm
Various models

OEM replacement

SRZ350L/N/NC/NCII 84-85, XS400J/K Maxim 82-83, XS400RJ/RK Seca 82-83, XS500C/D/E 76-78, XS750D 77, YTZ250N Tri-Z 85,

Description

Fork Seals
38 mm X 50 mm X 8 mm
Various models - listed below

OEM replacement for 92049-1066, 92049-1102, 92049-1178, 92049-1418, 51153-20A00, 1W4-23145-00-00, 2TK-23145-00-00, 3EN-23145-00-00, 42H-23145-00-00

Kawasaki
KZ1000K 81-82, KZ1000M 81-82, KZ1100B 81-82, KZ1000J 81-83, KZ1100A 81-83, KZ1100D 82-83, KZ1100L 83, ZX600C 88-97, ZX750F 87-90, ZX900A 84-86, KZ1100P 82-01, KZ1000R 82-83, ZN1100B 84-85
Suzuki
LS650F 86-87, LS650P 86-88, LS650P 95-03, LS650K5-K6 05-08
Yamaha
YZ125H-K 81-83, YZ250D-G 77-80, YZ400D-F 77-79, YZ465G 80, IT175K 83, IT250H/J 81-82, IT465H 81, XT500J/K 82-83, XV700CS/CSS/CT/CTC 86-87, XV700SS/SSC 86, XV700J1/J1C 97, XV750U-BC 88-91, XV750D-J 92-97, XV1000L-N 84-85, XV1000J/SJ 97, XV1100S-U 86-88, XV1100W-E 89-93, XV1100F-J 94-97, XV1100J/SJ 97, FZR400U/S 88-89, FZR600W-B 89-91, FZR600R 90-97, XJ600S 92-97, XJ700N-S 85-86, XJ700XN 85-86

Description

Fork Seals
30 mm X 40.5 mm X 10.5 mm
Various models

OEM replacement. See application list below.

Kawasaki
1970-71 G31M/G31MA, 1970-71 G4TR/A, 1972-75 G4TRB/C/D/E, 1972-75 G5/G5A/G5B/G5C, 1976-81 KE100A5-A10, 1982-01 KE100B1-B20. 1976 KV100A7, 1969 C2SS/C2TR, 1971-73 F6/A/B, 1968-70 F3, 1971-75 F7/A/B/C/D
Suzuki
1970-72 TC90/R/J, 1970-72 TC90/R/J, 1965-67 B100, 1973-77 TC100K/L/M/A, 1973-77 TS100K/L/M/A, 1965-67 B105P, 1965-67 KT120, 1972-77 TC125J/K/L/M/A/B, 1971-77 TS125R/J/K/L/M/B, 1973-74 GT185K/L, 1974-77 TC185L/M/A/B, 1971-76 TS185R/J/K/L/M/A, 1977-78 TS185B/C, 1965-69 T200, 1965-69 TC200, 1976-78 RM100A/B/C, 1973-75 TM125K/L/M, 1978 DS100C
Yamaha
1988-90 DT50U/W/A, 1974-76 DT100A/B/C, 1969 AT1E/AT1M/AT1MB, 1970-73 AT1B/AT1C/AT2/AT3, 1970-73 AT1MX/AT2M/AT2MX, 1974-76 DT125A/B/C, 1980 TZ125G, 1969-71 CT1/B/C, 1972-73 CT2/CT3, 19774-6 DT175A/B/C, 1970-71 CS3C/CS3B, 1972 CS5, 1974-75 RD200A/B/C, 1974-75 MX100A/B, 1974-75 MX125A/B, 2000-04 TTR125M/MC/N/P/R/S, 2003-06 TTR125ER/ES/ET/EV, 2003-06 TTR125LER/LES/LET/LEV, 2000 TTR125LWM, 2001-06 TTR125LN/LPC/LR/LS/LT/LV, 1974-75 YZ125A/B, 1974-75 MX175A/B, 1975-76 TY175B/C

Description

Kawasaki FZ, FZR, FJ Oil Filter
Models listed below

Made in Japan to original OEM manufacturer's specifications

Sudco oil filters are made by the same manufacturers who supply oil filters to the OEM mfgs.

FZ700T/TC '87, FZX700S/SC/T/TC Fazer '86-'87, FZ750N/S/SC '85-'86, FZ750U/UC '88, FZR750RT/RU '87-'88, FZR1000T/TC/U/UC/W/WC/A/AC '87-'90, FJ1100L/LC/N/NC '84-'85, FJ1200S/SC/T/TC '86-'87, FJ1200W/WC/A/AC/B/BC/D/DC '89-'92, FJ1200AD/ADC/AE/AEC (ABS)

Description

Air Filter - K&N
Individual 42mm Pod

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

#RC-1070
Made in USA.

Description

Air Filter - S&B
Individual 42mm Pod

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

Description

Air Filter - Emgo
Individual 42mm Pod

42mm internal diameter
75mm filter outside diameter
70mm filter length
15mm flange length

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Nikko Horn: Black & Chrome

6 volt 3 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db.

Description

Nikko Horn: Chrome

12 volt 3 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 110db.

Description

Compact Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Nikko Horn: Black 12V

12 volt 1.5 amp horn. Includes 79mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Chrome 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

Economy Horn: Black 12V

12 volt 1.5 amp horn. Includes 78mm mount bracket with pre-drilled holes. 105db

Description

4" Universal Chrome Mirror
10mm screw-in with 8" stem
Fits LH side

Universal fit for many makes and models.
Designed as a CB750 K0 replica but will fit any 10mm right hand thread mount.

Description

Kawasaki Z1 Replica Mirrors
10" Stems (set of 2)

Z1, KZ900, KZ1000 and any other make with a 10mm RH thread. Black satin finish.

EMGO. Replaces OEM: 56002-021

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 5/32" or 4mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

Speed Nut - Badge mounting
For 3/16" or 5mm post

Press-fit on mounting post from back of panel.

As used by OEM to attach side panel badges with posts on the back.

Description

12V Tail Light Bulb
Individual

12V/32/30
#1157 bulbs

Description

12V Headlamp Bulb
Individual

12V/25/25
Geniune Stanley

For vintage models that do not use sealed beam headlamps.

Description

Flywheel Puller
27mm x 1.0mm LH External Thread

Models listed below

Made by Motion Pro
08-0026

Description

Flywheel Puller
16mm x 1.5mm RH External Thread

Models listed below

Made by Motion Pro
08-0027

Description

Spring Hook (puller)
Use to remove exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and other parts.

Made in USA by Motion Pro

Description

Ignition Spark Tester
with adjustable spark gap

Provides instant diagnosis of ignition problems - whether a faulty coil or ignition wire. Adjustable gap measures spark stength from 0 to 40,000 volts. Works on motorcycles, cars, sleds etc.

Description

In-Line Spark Tester
For 6 or 12 volt systems

Attach black connector to spark plug and metal probe into spark plug cap. Crank engine over and light will flash if you have spark. Eliminates the need to remove plug to test for spark. Works on motorcycles, cars, sleds etc.

Description

Spark Plug Hole Thread Chaser
Cleans & repairs threads

For use on 14mm and 18mm threads. Tapered ends for easy starting. Works on motorcycles, cars, sleds etc.

Description

Spoke Wrench Set

2 piece set fits all 8, 9, 10, and 11 gauge spoke nipples.

Description

Motion Pro Cable Luber
Injects lubricant into cable housing

Save time. Avoid mess. Clamps over cable housing and wire. Allowis an aerosol can to be connected. When lube runs out of opposite end, the cable is lubricated.

Description

Silicone Liquid Gasket TB1194
Semi drying synthetic liquid gasket which is resistant to oil, water, gasoline and chemicals. Use TB1194 to seal transmission case covers, 2-stroke cases, engine covers and much more. 40 F to 302 F. Note: replaces TB1104
3.5 oz (100g)

Description

Silicone Liquid Gasket TB1211
White free flowing RTV silicone. TB1211 is recommended for sealing flange surfaces and screw setions to prevent oil, water, gasoline and chemical leaks.Tack free in 90 minutes and fully cured in 24 hours.
3.5 oz (100g)