KH500 1976
Complete Set for
Burgundy model
(6 pcs.)
$100 US
#KH1-76-001

Paint color:
Deep Burgundy

KH500 1976
Complete Set for
Copper model
(6 pcs.)
$100 US
#KH1-76-002

Paint color:
Copper

1976 KH500
11 Piece Warning &
Small Decal Set

Decals Included:
1 Flasher decal
1 Break-In decal
1 Caution Battery
1 Daily Safety Checks
2 Helmet Hook
1 Brake Usable Range
1 Important Drive Chain
1 Tire & Load Info
1 Magneto
1 Master Cylinder

$34 US
#KKH-76-500-WS

H1F 1975 & KH500 1976
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KH1-756-500G

Not sold separately

Applied over original gauge face. Disassembly of speedometer and tachometer is required. Openings and mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

For best results, sanding and repainting original gauge faces black is recommended prior to application of these decals.

H1F 1975 & KH500 1976
Gauge Faces (decal)
MPH Speedometer
$24 US pr.
#KH1-756-500GW

Not sold separately

Pearl White gauge faces are for specials.

Applied over original gauge face. Disassembly of speedometer and tachometer is required. Openings and mounting holes are pre cut to simplify application. Hole for "stop lamp" on tachometer must be trimmed out after installation.

For best results, sanding and repainting original gauge faces white is recommended prior to application of these decals.

Description

Kawasaki 1976 KH500 A8
Side Panel Badge

Chrome/Black/White

Description

Kawasaki H1 & KH500 Rear Shocks
1973-76 H1D, H1E, H1F, KH500

Reproduction H1 shocks OEM 45014-077 & 45014-095. Includes reflectors. Sold only in pairs.

12 5/8" from eye to eye. Correct for all 1973-1976 500 triples.

Description

Kawasaki H1 Seat Trim
1973 H1D, 1974 H1E, 1975 H1F, 1976 KH500A8

Includes mounting hardware. Will not fit early H1.

High quality replica.

Description

Kawasaki KZ, KH
Locking Gas Cap
Models Listed below

Replica fuel cap includes latch and 1 roll pin & 2 keys.

Replaces OEM part 51048-012
Quality Reproduction for 1976 onward

KH250, KH400, KH500 A8, KZ900 A4, KZ900 LTD, KZ1000 LTD, KZ1000 A1, KZ1000 A2, KZ1000 A2A, KZ1000 B, KZ1000 G1, KZ200 A1, KZ200 A1A, KZ200 A2, KZ400, KZ400 A1, KZ400 A2, KZ400 D3, KZ400 D4, KZ400 S, KZ650 B, KZ650 C, KZ650 F1, KZ750 B, KZ750 G1

Description

Kawasaki H1, H2, S2, F6, F7
Rubber Tank Strap
G5, G5B, G5C, KE100-A10, A5, A6, A8, A9, F6, F7C, F7, S1B, S1C, S2, H1D, H1E, H1F, KH500-A8, H2, H2B, H2C

Replaces OEM part 92072-029 or 92072-050.
Quality Reproduction

Description

Kawasaki H1, H2 & S Series
Tool Band
H1D, H1E, H1F, KH500
S1B, S1C, KH250, S2, S3, S3A, KH400

Available in BLACK ONLY

Genuine Kawasaki part.
Made in Japan.

Description

Kawasaki Handlebar Damper Rubber - Set of 4

PART# 92075-092
Quality Reproduction

For H2, H2A, H2B, H2C, H1C, H1D, H1E, H1F, KH500, Z1
Sold only as a set.
Replaces OEM part 92075-275

Description

Kawasaki H2, H1, S Series
Damper Rubber Set - Meters
H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 4

Description

Kawasaki H2, H1, S Series
Damper Rubber Set - Meters
H1B, H1C, H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1A/B/C, KH250, S2, S3/A, KH400

Quality Reproduction

Sold only as a set of 4

Description

Kawasaki H1, H2, Z1
Damper Rubber
H1D, H1E, H1F, KH500
H2, H2A, H2B, H2C, Z1, Z1A, Z1B

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 2

Description

Kawasaki H1, S1, S3, F11, G5
Damper Rubber - Fuel Tank
H1D, H1E, H1F
S1, S1B, S1C, KH250
S3, S3A, KH400,

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 2

Description

Kawasaki H1, H2, S1, S3, KH
Grommet - Side Panel
H2B, H2CH1D, H1E, H1F, KH500
S1B, S1C, KH250
S3, S3A, KH400,

Geniune Kawasaki part.
Made in Japan.

Sold only as a set of 4

Description

Kawasaki H1
Complete Gasket Set
1969-72 H1/A/B/C

Also fits 1973-75 H1D/E/F & 1976 KH500 but does not include ignition cover gasket.

Made in Japan to OEM specifications by Vesrah

Description

Nikko Horn: Black & Chrome

12 volt 2.5 amp horn. Includes 90mm mount bracket with pre-drilled hole or use OEM mounting bracket. Includes two crimp on connectors. 105db

Description

Genuine Kawasaki Shifter Rubber

PART# 13157-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Genuine Kawasaki Kickstart Rubber

PART# 13063-004
Geniune Kawasaki Part

For H2, H1, S1, S2, S3, KH, A1, A7 and other models.

Description

Kawasaki H2, H1, KZ
Footrest Rubber - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Geniune Kawasaki part.
Made in Japan.

Sold only as a pair.

Description

Kawasaki H2, H1, KZ
Footrest Bar - Rear
H1D, H1E, H1F, KH500, H2, H2A, H2B, H2C, S1, KH250, S3, S3A, KH400 & several KZ models

Geniune Kawasaki part.
Made in Japan.

Sold indidiually
Used with 92076-024 rubber

Description

Kawasaki
H1 Air Filter Element - K&N
H1 - 1969-1975

Fits in stock airbox. Washable/reusable filter that comes pre oiled and ready to use. Increased air flow for improved peformance.

Made in USA.

Description

Kawasaki
Master Cylinder Rebuild Kit
H2/A/B/C, H1B, H1D/E/F, KH500, KZ650B1, Z1/A/B, KZ900A4/A5, KZ400A1, KZ400A1/A2, KZ400/D/D3/D4, KH400A3/A4, S3/S3A, S2/S2A

Contains all components to rebuild one OEM master cylinder. Made in Japan.

Description

Kawasaki
Steering Stem Bearing Set
Models - listed below

Made in Japan. Tapered bearings are an upgrade from stock balll bearing/race for improved handling & longer life.

Description

Kawasaki H1B
Speedometer Cable - Black
1972 H1B

Made in Japan to OEM specifications

Replaces 54001-036

Description

Kawasaki H1
Tachometer Cable - Black
1972-75 H1 & 1976 KH500 A8
Also fits earlier models

Made in Japan to OEM specifications.
Includes rubber grommet

Replaces 54018-007

Description

Kawasaki H1
Starter Cable - Black
1972-75 H1 & 1976 KH500 A8
Also fits earlier models

Made in Japan to OEM specifications

Replaces 54017-031

Description

Kawasaki H1
Rear Brake Cable - Black
1972 H1B/C
Also fits earlier models

Made in Japan to OEM specifications.
Includes rod pin & adjuster nut

Replaces 54022-011

Description

Kawasaki H1
Complete 4 Piece Crank Seal Set
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary seals for one crankshaft rebuild.

Description

Kawasaki H1
Complete Engine Oil Seal Kit
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary seals for one engine rebuild. Including right & left crankshaft end seals.

Description

Kawasaki H1
Complete Engine & Crank Seal Set
1969-75 H1/A/B/C/D/E/F & 1976 KH500

Made in Japan to OEM specifications

Kit contains all necessary engine seals and all crank seals.

Description

Kawasaki H1
Carburetor Rebuild Kit
1973-75 H1D/E/F

Made in Japan to OEM specifications

Kit contains all necessary parts to rebuild one OEM carburetor.
Includes choice of 92.5 & 95 main jets

Description

Kawasaki H2, H1, A7,
Mikuni Carburetor Float
1972-75 H2, 1969-75 H1, 1976 KH500, 1966-71 A7, 1970-71 A7SS

Geniune Mukuni part. Made iin Japan.

Sold individually.

Description

Kawasaki
Handlebar Bolt Kit
Z1, H1, H2, W1, A1, A7 and various others, including some KZ models

Kit Includes:
4 - Chrome Bolts
4 - Washers

Description

Kawasaki H1 & KH500
Replica Handlebars
1969-1975 H1/A/B/C/D/E/F
1976 KH500 A8

Replica of the stock handlebars

Replaces OEM part 46003-017 which is correct for all years

Description

Kawasaki H1
Spoke & Nipple Kit - Rear
1969-75 H1, H1A, H1B, H1C, H1D, H1E, H1F & 1976 KH500 A8

OEM replacement

Replaces 41026-046

Description

Kawasaki H1, H2, Z1, KZ
Rim DID - Front 19" Chrome

1969-76 H1/A/B/C/D/E/F KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976-77 Z900A4/A5, 1977-80 KZ1000A1-A4, 1977-79 KZ650B1-B3, 1976-79 KZ750B1-B4
Reproduction Front 19" Wheel Rim. 40 hole 1.85" wide

Description

Kawasaki H1, H2, Z1, KZ
Rim DID - Rear 18" Chrome

1969-76 H1/A/B/C/D/E/F KH500, 1972-75 H2/A/B/C, 1973-75 Z1/A/B, 1976-77 Z900A4/A5, 1977-80 KZ1000A1-A4, 1977-79 KZ650B1-B3, 1976-79 KZ750B1-B4
Reproduction Rear 18" Wheel Rim. 40 hole 2.15" wide

Description

Kawasaki Clutch & Brake Lever Set
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacements

Description

Kawasaki Clutch Lever
Z1/A/B, H1D/E/F, H2/A/B/C, S3/A

OEM replacement

Description

Kawasaki Front Brake Lever
Z1/A/B, KZ900A4/A5, KZ1000A1, KZ1000B1/B2 LTD, KZ750B1/B2, KZ650, KZ400, H1D/E/F, H2/A/B/C, S3/A, KH400A3/A4/A5

OEM replacement

Description

Fork Seals 36 mm X 48 mm X 10.5 mm
H1B/D/E/F 72-75

OEM replacement

Description

Kawasaki H1 500 Piston Kit
Sizes from 60.5mm to 61mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H1 500 Piston Kit
Sizes from 61.5mm to 62mm

Wiseco forged piston kit includes 3 pistons, 3 rings, 3 piston pins and 6 retainer clips

Small end bearings sold separately.

Description

Kawasaki H1 Connecting Rod Kit
1969-1975 H1 & 1976 KH500

Kit includes connecting rod, crank pin bearing, crank pin, thrust washers and piston pin bearing.

Rod kits sold individually. Made in Japan to OEM specifications by Vesrah.

Safety Checks Decal
H1D & H1E
$10 US
#KH1-734-002

Complete H1D, E & F set

Caution Battery Decal
H1D, H1E, H1F & KH500
$8 US
#KH1-73456-002

Complete H1D, E & F set

DOT 3 Brake Fluid
H1, H2, Z1 and others
-located on maaster cylinder cap
$7 US
#KAW-MC-001

Silver on a clear backing

Side covers have cast emblems.
Click here for various small decals for the KH500.

To order any items on this page, please go to our order page for more details.